Sign In

General Cannabis FAQs

General Cannabis FAQs

Here are the most common questions we see across our cannabis communities. This FAQ section is updated regularly, so if you’ve got a question we missed, please let us know.

Can you fly to Mexico with Cannabis in your luggage?

It is FEDERALLY ILLEGAL to cross any state line with cannabis let alone crossing international borders where cannabis remains illegal. Although the TSA has gone to say they are not looking for medical or recreational cannabis and Mexico announcing legalization of cannabis, there is still a great risk as laws have yet been put into place for legalization and travel.

How to Roll a Blunt

Rolling a blunt involves a series of steps that require some practice to master. Here’s a simplified procedure on how to roll a blunt:

  1. Materials Needed:
    • Cannabis (ground)
    • A cigar or cigarillo
    • A sharp knife or blade
    • A lighter
  2. Preparation:
    • Begin by grinding your cannabis to a medium-fine consistency using a grinder.
    • Empty the cigar: Use a blade to cut along the length of the cigar, remove the tobacco inside and discard it or save it for later use.
  3. Fill and Shape:
    • Wet the interior slightly with your saliva to make it pliable.
    • Fill the emptied cigar wrap with your ground cannabis. Distribute it evenly along the length to ensure an even burn.
  4. Roll:
    • Tuck the side of the wrap closest to you over the cannabis, then roll it over until the other side of the wrap is underneath.
    • Use your fingers to shape and compress the cannabis as you roll to ensure it’s tight and even.
  5. Seal:
    • Lick the remaining edge of the wrap, then press it down gently to seal the blunt.
    • You may need to go over the seam with a lighter briefly to help it stay sealed, but avoid overheating it.
  6. Enjoy Responsibly:
    • Light the blunt and enjoy. Remember to consume responsibly, especially if you’re in a region where cannabis consumption is legal.

Remember, the legality of cannabis varies widely from place to place, so it’s essential to be aware of and comply with local laws and regulations regarding cannabis use and possession.

What is the difference between a joint and a blunt?

The terms “joint” and “blunt” refer to different methods of consuming cannabis, and they have a few key differences:

  1. Material:
    • Joint: A joint is rolled with translucent rolling papers made from a variety of materials including rice, hemp, or wood pulp.
    • Blunt: A blunt is rolled using a cigar or cigarillo wrap, which is made from tobacco leaves.
  2. Size and Cannabis Quantity:
    • Joint: Joints tend to be smaller than blunts and typically hold between 0.25 to 1 gram of cannabis.
    • Blunt: Blunts are usually larger and can hold 1 to 3 grams of cannabis or more, depending on the size of the cigar wrap.
  3. Flavor and Experience:
    • Joint: The thin paper used for joints is practically flavorless, so the taste of the cannabis is more apparent.
    • Blunt: The tobacco leaf wrap imparts a distinct flavor and can complement or contrast with the taste of the cannabis.
  4. Nicotine Content:
    • Joint: Joints do not contain nicotine unless mixed with tobacco (a practice known as rolling a “spliff”).
    • Blunt: The tobacco leaf wrap used for blunts contains nicotine, which can affect the experience and add an additional level of health risk.
  5. Burn Time:
    • Joint: Joints tend to burn faster due to the thin paper used.
    • Blunt: Blunts burn slower due to the thicker tobacco leaf wrap, which can result in a longer smoking session.
  6. Appearance:
    • Joint: Joints are usually white or light tan, depending on the type of rolling paper used, and have a cylindrical shape with a twist at one end to prevent cannabis from falling out.
    • Blunt: Blunts are brown due to the color of the tobacco leaf and resemble a cigar in appearance.
  7. Legality and Social Acceptance:
    • The legality of cannabis consumption, whether in a joint or a blunt, varies widely from region to region. It’s essential to be familiar with and comply with local laws and regulations regarding cannabis use and possession.

Both joints and blunts are popular methods of smoking cannabis, and the choice between the two often comes down to personal preference, the desired smoking experience, and local laws regarding tobacco and cannabis.

How to grind weed without a grinder

Grinding cannabis without a grinder is possible, but care should be taken to ensure that the cannabis is broken down to a suitable consistency for your intended use. Here are a few methods:

  1. Hand Breaking:
    • Carefully break apart the buds with your fingers.
    • This method can be a bit sticky and may not provide the most even grind.
  2. Scissors and a Shot Glass:
    • Place your cannabis buds in a shot glass.
    • Use a pair of clean, sharp scissors to snip the cannabis into smaller pieces until reaching your desired consistency.
  3. Knife and Cutting Board:
    • Place your cannabis buds on a clean cutting board.
    • Using a sharp knife, carefully chop the cannabis until it reaches your desired consistency.
  4. Pill Bottle and Coin:
    • Place your cannabis buds in a pill bottle with a clean coin.
    • Seal the bottle and shake vigorously. The coin will help break apart the cannabis.
  5. Mortar and Pestle:
    • Place your cannabis buds in a mortar and gently crush with the pestle until reaching your desired consistency.
    • Be cautious to not turn it into a powder as it can be too fine for some uses.
  6. Coffee Grinder:
    • A coffee grinder can work in a pinch, but it may grind the cannabis too finely and is difficult to clean.
  7. Cheese Grater:
    • Gently rub the buds against the smallest holes on a cheese grater.
    • This method can be effective but may be a bit messy.
  8. Pestle and Bowl:
    • If you don’t have a mortar and pestle, using a heavy object like a pestle and a sturdy bowl can work.
    • Gently crush the cannabis until it’s the desired consistency.
How to grind weed without a grinder

Grinding cannabis without a grinder is possible, but care should be taken to ensure that the cannabis is broken down to a suitable consistency for your intended use. Here are a few methods:

  1. Hand Breaking:
    • Carefully break apart the buds with your fingers.
    • This method can be a bit sticky and may not provide the most even grind.
  2. Scissors and a Shot Glass:
    • Place your cannabis buds in a shot glass.
    • Use a pair of clean, sharp scissors to snip the cannabis into smaller pieces until reaching your desired consistency.
  3. Knife and Cutting Board:
    • Place your cannabis buds on a clean cutting board.
    • Using a sharp knife, carefully chop the cannabis until it reaches your desired consistency.
  4. Pill Bottle and Coin:
    • Place your cannabis buds in a pill bottle with a clean coin.
    • Seal the bottle and shake vigorously. The coin will help break apart the cannabis.
  5. Mortar and Pestle:
    • Place your cannabis buds in a mortar and gently crush with the pestle until reaching your desired consistency.
    • Be cautious to not turn it into a powder as it can be too fine for some uses.
  6. Coffee Grinder:
    • A coffee grinder can work in a pinch, but it may grind the cannabis too finely and is difficult to clean.
  7. Cheese Grater:
    • Gently rub the buds against the smallest holes on a cheese grater.
    • This method can be effective but may be a bit messy.
  8. Pestle and Bowl:
    • If you don’t have a mortar and pestle, using a heavy object like a pestle and a sturdy bowl can work.
    • Gently crush the cannabis until it’s the desired consistency.
Go back to Main FAQ Page
© 2025 The Cannabis Community. All rights reserved.